DV- 410 Automatic Reinforcement Profile Screwing Machine with Triple Drilling
DV- 410
DV-410 performs screwing and triple handle drilling operations on PVC profiles in one machine controlled by computer. System has the capacity to stack 10 profiles (Max. profile length 5000 mm). It can make precise screwing and triple drilling through servo motors. The system is equipped double screw-driving units, stable and dynamic units operate simultaneously. Profile unloading system is automatic. Screwing positions can be adjusted according to different profile section sizes. Screw feed is automatic. Automatic screw depth stop system works independent of the profile height. During the process, the pneumatic profile fixing system is activated.
Overview
- Screwing and Triple handle drilling operations on PVC profiles are grouped in one machine controlled by computer
- Loading of 10 profiles (max 5,0 m length)
- Able to screw and triple drill operations due to servo system
- Automatic profile off-loading station
- Adjustable screwing positions according to different profile cross sections
- Automatic screw feed
- Automatic screwing depth stop system independent of profile height
- Pneumatic profile fixing system during the process
Available Options
- Frame installation hole unit
Video Demo & Application
Specs & Sizing
Power supply: 400V, 3ph, 50-60Hz
Power output: 5kW, 13A
Air pressure: 6-8 bar
Air consumption: 550L/min
Minimum profile height: 35mm
Maximum profile height: 128 mm
Minimum profile width: 30 mm
Maximum profile width: 135 mm
Machine height: 2300 mm
Machine length: 9219 mm
Machine width: 3016 mm
Machine weight: 1,500 kg