FU- 440 Copy Router

FU- 440

FU-440 Copy Router opens the barrel, lock, lever locations and water discharge channels on the template placed on the machine in 1: 1 scale on Aluminum and PVC profiles. With this feature, it is one of the indispensable machines of both entry-level and high-capacity production facilities.

Overview

  • Template free depth adjustment and routing on two axes with measurement scale rod.
  • Routing of door handle holes, lock cylinders and drain slots.
  • Manual two-stepped copy finger for 5 mm (0.19 in.) and 8 mm (0.31 in.) cutter diameters.
  • 1:1 ratio transfer of the pattern from a template onto the profile.
  • Precise routing with minimal effort and simple operation.
  • Frequency controlled (inverter) high speed motor.
  • Pneumatic profile clamping.
  • Cutter lubricating system for PVC and aluminum profiles.
  • Tool kit
Available Options
  • Left and right length stop system

Specs & Sizing

Operating voltage: 240, 400, 480 or 575V, 3 ph., 50/60 Hz
Connected load: 0.75 kW (2.12, 1.27, 1.06 or 0.88 F.L.A.)
Power output of each motor: 0.37 kW (0.5 hp)
Spindle speed: 12,000 rpm
Routing capacity: 250 x 100 mm (9.84 x 3.93 in.)
Stroke: 100 mm (3.93 in.)
Maximum profile section dimensions: 110 mm x 100 mm
Working air pressure: 6-8 bar (90-120 psi)
Air consumption: 5 l/min. (0.17 cfm)
Machine height: 1,650 mm (64.96 in.)
Machine width: 450 mm (17.71 in.)
Machine length: 620 mm (+1,000 mm profile support for left & right)
Machine weight: 70 kg (155 lbs.)