FU- 465 Copy Router with Triple Drill & Milling
FU- 465
FU-465 Copy Router with Triple Drilling and Milling opens the barrel, lock, lever locations and water discharge channels on the template placed on the machine on Aluminum and PVC profiles in 1: 1 scale. With this feature, it is one of the indispensable machines of both entry level and high capacity production facilities.
Overview
- Routing of handle holes, lock cylinders and drain slots on PVC profiles and aluminum profiles.
- Possibility of template free depth adjustment and routing on two axis with measurement scale rod.
- Precise routing with minimal effort and simple operation
- 1:1 ratio transfer of the pattern from a template onto the profile
- Triple spindle drilling with automatic feed for espagnolette holes on PVC sash profiles
- Two hand safety operation
- Frequency controlled (inverter) high speed motor
- Automatic espagnolette and lock canal milling.
- Manual two stepped copy finger for 5 mm and 8 mm cutter diameters
- Pneumatic profile clamping
Video Demo & Application
Specs & Sizing
Power supply: 400V, 3 ~, 50/60 Hz
Total Power Output: 3.5 kW
Router power output: 0.75 kW (1.00 hp.)
Triple drill power output: 1.1 kW (1.47 hp.)
Milling power output: 1.5 kW (2.01 hp.)
Drill spindle speed: 930 rpm
Milling spindle speed: 12000 rpm
Routing capacity: 250 x 100 mm (9.84 x 3.93 in.)
Stroke: 100 mm (3.93 in.)
Maximum profi le section dimensions: 110 x 100 mm (4.33 x 3.93 in.)
Working air pressure: 6-8 bar (90-120 psi)
Air consumption: 50 l/min. (1.76 cfm)
Machine height: 1650 mm (64.96 in.)
Machine width: 1000 mm (39.37 in.)
Machine length: 840 mm (33.07 in.) (+1000 mm (39.37 in.) conveyor)
Machine weight: 140 kg. (310 lbs.)
Gallery
