HP-114 Corner Crimping Machine

HP-114

HP-114 Corner Press Machine is used for joining the corners of aluminum joinery. Before the corner press process, the aluminum slices are placed into the profiles by the operator, the corner of the joinery is formed and the corner is based on the rear jaw of the machine. The press blades of the machine can be adjusted in height according to the design of aluminum profiles and aluminum wedges suitable for these profiles.Thus, a single machine can be used for corner press operations of different aluminum systems. A 90 ° corner joint is achieved thanks to the Wedge Corner Press process, which provides a much better sealing and aesthetic appearance than screwing. The hydraulic system of the machine provides a high pressure of 6500 kgf and provides error-free corner joints. With vertical hydraulic pistons, the corner of the aluminum joinery is fixed in the best way and the result is achieved with minimum tolerance. HP 114 Corner Press Machine provides the opportunity to join corners according to all kinds of profile sections thanks to its adjustable supporters.

Overview

  • Joins the corners of aluminum profiles by crimping the corner of the profile into the wedge
  • Hydraulic operating system sustains high pressure power
  • Two vertical pneumatic clamps work with hydraulic pressure for maximum profile fixation
  • Able to work with all types of profiles
  • The crimping blades can be adjusted easily with a magnetic fixation system
  • The support is lowered hydraulically for easy loading and off-loading of work pieces
  • The magnetic support block enables easy adjustment
  • Step by step control of the operation using a foot pedal
  • Tool kit
Notes
  • Operating voltages may require an external transformer
  • Consult factory for lengths and specifications not mentioned above
  • North American measurements are approximate
  • Months 1-12 of the limited warranty cover parts and labor; months 13-24 cover parts only. See our Warranty Statement for details
  • Operating and Maintenance Manual
  • Two-year limited warranty (see Notes)

Specs & Sizing

Operating voltage: 400V, 3 ph., 50/60 Hz Connected load: 3.0 kW (8.49, 5.09, 4.24 or 3.54 F.L.A. (calculated))
Hydraulic pressure: 150 bar (2,175.56 psi) Pressing power: 6,500 kgf. (14,330.04 lbf.)
Profile height: 15-90 mm (0.59-3.54 in.) Maximum profile width: 140 mm (5.51 in.)
Machine height: 1,300 mm (51.18 in.) Machine length: 1,020 mm (40.16 in.)
Machine width: 1,050 mm (41.34 in.) Machine weight: 300 kg (662 lb.)