SAC-845 Automated Bug Screen Mesh and Spline Insertion Machine

SAC-845

The SAC-845 automates the application of screen mesh to a pre-assembled screen frame. The SAC-845 utilizes bar code scanning or direct ERP input to identify the screen frame, automatically choose and apply the correct screen mesh, insert the screen spline, and trim excess perimeter screen mesh. Estimated typical cycle time for a 24″ x 36″window screen frame is approximately 35 seconds, including all handling.

Overview

  • 0.140” to 0.200” screen spline diameter
  • 2 position screen mesh applicator to optimize utilization and reduce scrap
  • Typical .010” thickness, polyester, nylon or PVC screen mesh
  • Input via HMI screen or via bar code scan
  • Minimum frame size 15” x 15”
  • Maximum frame size 30” x 60”, larger sizes available upon demand
  • Typical frame profile size, minimum- .375” x 1.125”, Maximum- .5” x 1.125”.140” to .200” screen spline diameter
Notes
  • Model SAC-855 can accommodate larger sizes such as 48″ x 96″ patio doors as well as smaller window sizes

Video Demo & Application

Specs & Sizing

Machine foot print 10’x 15’ (includes safety zone)
400 VAC, 10 amps, wired internet connection required
.140” to .200” screen spline diameter
2 position screen mesh applicator to optimize utilization & reduce scrap
Typical .010” thickness, polyester, nylon or PVC screen mesh
Input via HMI screen or via bar code scan
Air pressure: 4-6 bar
Minimum frame size 15” x 15”
Maximum frame size 30” x 60”, larger sizes available upon demand
Typical frame profile size, minimum- .375” x 1.125” & maximum- .5” x 1.125
Frame profile size maximum- .5” x 1.125