TA-144/50 Automatic Aluminum Wedge Cutting Saw
TA-144/50
TA-144/50 Automatic Saw with Ball Screw Material Infeed System can cut Aluminum profiles with high precision with a 600 mm diameter saw that works with the principle of “undercut” and speed can be adjusted. The saw, operating at a 90 ° angle with servo motor control, allows profiles to be cut at the desired height and speed, thus offering a wide cutting range. Again, the servo-controlled profile sliding system allows the profiles to be sliced to the desired length and thanks to the 0.1 mm cutting tolerance, wedges in equal dimensions can be sliced.
Overview
- CNC control system.
- Profile feed length, profile feed speed, cutting height and blade feed speed are controlled by servo motors.
- Servo motors profile system can adjust feed speed according to the profile weight.
- Maximum speed and ultimate accuracy with servo motor system; ± 0.1 mm (± 0.004 in.) cutting accuracy.
- Maximum surface quality and dimensional accuracy with “Clean cut” system.
- Horizontal and vertical pneumatic profile clamping system.
- 3000 mm (118.11 in.) infeed roller conveyor.
- Ability to do automatic slicing.
- Ability to create a cutting list.
- Cutting list data transfer is available via network connection or USB interface.
- Safety cover with window inserts and safety switch protection.
- Touchscreen PLC.
- Filter-Regulator-Lubricator for incoming air supply.
- Pulse spray mist blade lubricant system.
Available Options
- TK-060 Left and right conveyor system
- TK-061 3m (118.11 in.) Right hand roller stock conveyor & measuring stop
- TK-062 3m (118.11 in.) Left hand roller stock conveyor & measuring stop
- MS-300 Automatic measuring and positioning system
- AH-041 Hydro-pneumatic saw head feed system
- Saw blades for different profile types
- Chip collection systems
Notes
- Voltages may require an external transformer
- Consult factory for lengths and specifications not mentioned above
- North American measurements are approximate
- Haffner North America reserves the right to make technical changes at any time.
Specs & Sizing
Power supply: 240, 400, 480 or 575V, 3 ph., 50/60 Hz
Saw blade motor power: 2.2 kW (2.94 hp)
Spindle speed: 2,800 rpm (50 Hz), 3,360 rpm (60 Hz)
Saw blade diameter: 350 mm (13.77 in.)
Working air pressure: 6-8 bar (90-120 psi)
Air consumption: 95 I/min. (3.35 cfm)
Machine height: 1700 mm (66.92 in.)
Machine length: 2000 mm (78.74 in.) (+2900 mm (114.17 in.) conveyor)
Machine width: 1100 mm (43.30 in.)
Machine weight: 1100 kg (2,425 lbs.)
Gallery
